Welcome to suzhou Oudesman Lifting Machinery Co., LTD. Official website!
Contact us Contact Us

Suzhou odesman Lifting Machinery Co., Ltd 
Contact person: Mr. Zhu 
Manual machine:13814822558
Telephone:0512-65086223
    0512-65086239 
Mail box:szodsm@163.com
Address: Yantou Road, Xinhua Industrial Park, Wangting Town, Xiangcheng District, Suzhou (No.2, Wanfang Road)
< >

Fixed landing bridge

产品参数/ Product parameter

Fixed landing bridge

The product description

The fixed hydraulic loading and unloading bridge is a special auxiliary equipment to realize rapid loading and unloading of goods. Its height adjustment function enables a bridge to be set up between the truck and the warehouse platform. Forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading of goods through it.

Product introduction

 

The fixed hydraulic loading and unloading bridge is a special auxiliary equipment to realize rapid loading and unloading of goods. Its height adjustment function enables a bridge to be set up between the truck and the warehouse platform. Forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading of goods through it

Product advantage

(1) The height of the boarding bridge can be adjusted according to the height of the freight car.

(2) Using hydraulic power, equipped with high-performance components, easy to operate safe and reliable.

(3) The mesa adopts decorative steel plate with good anti-skid performance.

→ The lip plate is connected with the platform by the whole shaft, with high strength and good reliability.

→ Adopt imported seals to ensure excellent sealing performance of hydraulic system.

→ Adopt imported integral modular hydraulic station, good sealing, long service life.

→ High strength "U" shaped beam design can ensure its high load long time without deformation. 

→ Adopt anti-skid pattern steel plate, so that the platform has good anti-skid performance.

→ The two sides of the foot pad to prevent the toe into the platform caused accidental injury.

→ With professional safety detail design (safety support rod), to ensure the maintenance personnel to enter the internal maintenance of the embarkation bridge, maximize the safety coefficient.

Install pit map

 

 

1. The two embedded pipes shall use the power power cord and the control power cord respectively. The diameter of the two embedded pipes shall be greater than 25mm.

2. The height of the platform depends on the height of the truck usually used by the user, which is usually around 1400mm.

3. The size error of the pit shall be less than 5mm, the pit plane shall be square, the pit wall shall be vertical, and the pit bottom shall be flat.

 

Next:Fixed landing bridge
Contact us
Contact person: Mr. Zhu
Hand machine: 13814822558
Telephone: 0512-65086223
0512-65086239
Mail box: szodsm@163.com
Address: Yantou Road, Xinhua Industrial Park, Wangting Town, Xiangcheng District, Suzhou (No. 2, Wanfang Road)
Copyright © 2020 Copyright © 2014-2015 All Rights Reserved.Suzhou odesman Lifting Machinery Co., Ltd Do not mirror 苏ICP备11084424号-3 Technical support: Shidelway Technology